3-Piece Ball Valves is a quarter-turn valve which uses a hollow, perforated and pivoting ball to control flow through it. It is open when the ball’s hole is in line with the flow. It closed when it is pivoted 90-degrees by the valve handle.
The handle lies flat in alignment with the flow when open, and is perpendicular to it when closed, making for easy visual confirmation of the valve’s status.
Ball valves are durable, performing well after many cycles, and reliable, closing securely even after long periods of disuse. These qualities make them an excellent choice for shutoff and control applications, where they are often preferred to gates and globe valves, but they lack their fine control in throttling applications.
Ease of Operation
The ball valve’s ease of operation, repair, and versatility lend it to extensive industrial use, supporting pressures up to 1000 bar and temperatures up to 752 °F (400 °C), depending on design and materials used. Sizes typically range from 0.2 to 48 inches (0.5 cm to 121 cm).
Valve bodies are made of metal, or metal with a ceramic; floating balls are often chrome plated for durability. One disadvantage of a ball valve is that they trap water in the center cavity while in the closed position. In the event of a freeze, the sides can crack due to expansion of ice forming.
Insulation and Heat Tape
Some means of insulation or heat tape in this situation will usually prevent damage. Another option for cold climates is the “freeze tolerant ball valve”. This style of ball valve incorporates a freeze plug in the side so in the event of a freeze up, the freeze plug ruptures (acts as a sacrificial disk), thus making for an easy repair. Now instead of replacing the whole valve, just screw in a new freeze plug.
In the case that a ball valve is used for cryogenics or product that may expand inside of the ball, there is a vent drilled into the upstream side of the valve. This is referred to as a vented ball. Safety is the number one concern when engineers specify a vented ball.
A 3-Piece Ball Valves should not be confused with a “ball-check valve”, a type of check valve that uses a solid ball to prevent undesired backflow.
Other types of quarter-turn valves include the butterfly valve and plug valve and freeze proof ball valve.
3-Piece Ball Valves Type
There are five general body styles of ball valves: Single body, three-piece body, split body, top entry, and welded. The difference is based on how the pieces of the valve—especially the casing that contains the ball itself—are manufactured and assembled. The valve operation is the same in each case.
In addition, there are different styles related to the bore of the ball mechanism itself.
Ball valves in sizes up to 2 inch generally come in single piece, two or three piece designs. One piece ball valves are almost always reduced bore, are relatively inexpensive and generally are throw-away. Two piece ball valves are generally slightly reduced (or standard) bore, they can be either throw-away or repairable.
3-Piece Ball Valves Design
The 3-Piece Ball Valves design allows for the center part of the valve containing the ball, stem & seats to be easily removed from the pipeline. This facilitates efficient cleaning of deposited sediments, replacement of seats and gland packings. In addition, polishing out of small scratches on the ball, all this without removing the pipes from the valve body. The design concept of a three piece valve is for it to be repairable.
3-Piece Ball Valves Full port
A full port or more commonly known full bore ball valve has an over-sized ball so that the hole in the ball is the same size as the pipeline resulting in lower friction loss. Flow is unrestricted but the 3-Piece Ball valves are larger and more expensive so this is only used where free flow is required, for example in pipelines which require pigging.
Reduced port or reduced bore
In Reduced port (more commonly known as reduced bore) ball valves, flow through the valve is one pipe size smaller than the valve’s pipe size resulting in flow area being smaller than pipe. As the flow discharge remains constant and is equal to area of flow.
3-Piece Ball Valves V port
A V port ball valve has either a ‘v’ shaped ball or a ‘v’ shaped seat. This allows for linear and even equal percentage flow characteristics. When the 3-Piece Ball valves are in the closed position. When opening is commenced the small end of the ‘v’ is opened first allowing stable flow control during this stage.
This type of design requires a generally more robust construction due to higher velocities of the fluids, which might damage a standard valve. These can be referred to as a type of control valve but are typically not as accurate. Not as accurate as a balancing valve, needle valve, globe valve, or pressure regulating valve.
Many industries encounter problem with residues in the ball valve. Where the fluid is meant for human consumption, residues may also be health hazard. When the fluid changes from time to time contamination of one fluid with another may occur.
Residues arise because in the half open position of the ball valve a gap is created between the ball bore and the body in which fluid can be trapped.
To avoid the fluid getting into this cavity, the cavity has to be plugged, which can be done by extending the seats in such a manner that it is always in contact with the ball. This type of ball valve is known as Cavity Filler Ball Valve.
There are a few types of ball valves related to the attachment and lateral movement of the ball:
A trunnion ball valve has additional mechanical anchoring of the ball at the top and the bottom, suitable for larger and higher pressure valves (say, above 10 cm and 40 bars).
A floating ball valve is one where the ball is not held in place by a trunnion. In normal operation, this will cause the ball to float downstream slightly. This causes the seating mechanism to compress under the ball pressing against it.
Furthermore, in some types, in the event of some force causing the seat mechanism to dissipate (such as extreme heat from fire outside the valve).
The ball will float all the way to metal body which is designed to seal against the ball providing a somewhat failsafe design.
Manually Operated 3-Piece Ball Valves
Manually operated ball valves can be closed quickly and thus there is a danger of water hammer. Some 3-Piece Ball Valves are equipped with an actuator that may be pneumatically, hydraulically or motor operated.
These 3-Piece Ball Valves can be used either for on/off or flow control. A pneumatic flow control valve is also equipped with a positioner. The Positioner transforms the control signal into actuator position and valve opening accordingly.
There are no reviews yet.