Description
Fork Density Flow Meter can measure the density, concentration, gravity, temperature, and accuracy of liquids without being affected by temperature, pressure, density and viscosity.
Applications:
Pipeline interface Inspection, Slurry Solids monitoring and corrosive acid concentration control; density and concentration monitoring that require rapid response. Furthermore, continuously measure pipelines in real-time with your Density Flow Meter through pipelines and storage tanks to increase installation flexibility and choose from a variety of corrosion-resistant materials to measure the density and concentration of key chemicals. Also, it supports protocols connected to DCS, PLC and Flow computers. Also, Pass hazardous area Approved Head-Mounted Transmitters extend the range of use, the transmitter supports local configuration and display.
Fork density flow meter
- Measure density, concentration, gravity, temperature of liquid
- The accuracy will not be affected by temperature, pressure, density, viscosity, etc.
- Accuracy: ±0.002g/cc; ±0.001g/cc optional
- Applications: pipeline interface detection ,mineral slurry solids monitoring, and corrosive acid concentration control; Where fast-response density and concentration monitoring is required.
- Moreover, Increased installation flexibility with continuous, real-time measurement in pipelines, by pass loops and tanks
- Also, Choose from a wide range of corrosion-resistant materials for measuring density and concentration of critical chemicals Support protocols for connection to DCS, PLC and flow computers
- Finally, Expand usage with a hazardous area-approved, head-mounted transmitter that supports local configuration and display
Maybe you are looking for Coriolis Flow Meters?
Specifications
Insertion type/ Pipeline type:
The flow velocity should be below 1.5m/s. If the flow velocity is too fast, or the pipe diameter is too small, it is recommended to expand the pipeline to at least DN 150.
Length:
The standard length of the turning fork is 128mm. We can extend the length of the turning fork based on the special requirements.
Material:
We can customize the materials for you as your requirements, including SS316L, HC Hastelloy, SS 2205 steel, Titanium, etc.
Connections:
Connections can be specially customized based on your own requirements. GB Flange/ ANSI/ DIN/ JIS Flanges / threaded connections/ Tri-clamp connections, etc.
Specifications
(1) Density accuracy: standard ±2,0 kg/m3(±0,002 g/cm3), ±1,0 kg/m3(±0,001 g/cm3) optional
(2) Operating density range: 500-2500 kg/m3 (0.5-2.5 g/cm3)
(3) Operating temperature range -short stem: –50 °C a +200 °C (–58 °F a +392 °F)
(4) Operating temperature range- long stem: –40 °C a +150 °C (–40 °F a +302 °F)
Materials:
Wetted parts- short-stem meter ( standard length of 128mm)
- 316L stainless steel
- Alloy C276
- 316L stainless steel with PFA coated
- Alloy C276 with PFA coated
Wetted Parts- long-stem meter:
- Alloy C276 for meters up to 2 m (6.5 ft) long
- 316L stainless steel for meters up to 2 m (6.5 ft) long Tine finish
- Hose connection up to 10m (32.8 ft)
Transmitter Output Channels:
- Current output, 4- 20 mA
- Frequency output, 0- 1KHz
- Modbus/RS-485 output
- HART optional
Display Functions
- View process variables
- Touch screen transmitters
- Supports multiple languages ( English and Chinese)
Meter approvals, calibrations, and certifications Agencies & types of approval available
- CE
- ATEX
- ISO 19001
- ISO 14001
- OHSAS 18001
Only logged in customers who have purchased this product may leave a review.
Reviews
There are no reviews yet.